dlmag

Crystallized titanium wears a rose gold coat on this 37 millimeter dress watch

MING 51.01 Halo worn on a wrist with a black goat leather strap

MING cut the 51.01 Halo from crystallized grade 5 titanium, heated the metal in a vacuum chamber until its crystal grains grew large, then coated the case in a warm 5N rose gold tone.

Gloss black meets rose gold. Thickness is 8 millimeters with a 43 millimeter lug to lug span on a 37 millimeter case, and the black opaline lacquer dial carries no luminous material anywhere, so the face stays a study in black and warm metal.

MING 51.01 Halo
Crystallized grade 5 titanium with a 5N coating
37 mm by 8 mm dress watch case
150 pieces in the edition
CHF 10,900

Heat grows the grain, acid shows it

Acid etching reveals the grain.

A 5N coating warms the gray toward rose gold. Grade 5 titanium climbs as high as 1,200 degrees Celsius inside a vacuum chamber before a controlled cool down, a cycle that enlarges the metal’s natural grain until the surface shows a mottled, stone like pattern.

MING’s new slim handset wears the same 5N tone, with brushed and sandblasted faces cut by polished angles.

The grain also resists sameness at arm’s length, since two Halo cases side by side show different mottling across the bezel and lugs, which is why the edition amounts to 150 related objects rather than 150 copies. Every case carries a different grain map, because the pattern is the metal itself rather than a print, and light moves across the lugs in patches as the wrist turns.

Indices live inside the crystal

Hour markers are engraved into the box shaped top sapphire crystal and filled with 5N colored lacquer, so the markers float at the glass line while the dial surface below stays perfectly smooth and uninterrupted.

No lume, by choice. Below the glass, the lacquer dial pairs a polished center with a circular brushed edge, an opaline shift that reads deep black straight on and softens at an angle when warm light catches the brush lines across the periphery.

Sapphire works as structure and as print surface here, since the engraved markers sit in the top crystal itself, and both crystals carry antireflective coating on two sides, while water resistance runs to 50 meters. The 20 millimeter lugs take a black goat leather strap made for MING by Jean Rousseau Paris, closed by a crystallized titanium flying blade tuck buckle with micro adjustment built in and curved quick release spring bars.

Sapphire also serves as the print surface here, since the engraved markers sit in the top crystal itself, and a crystal replacement years from now would carry the dial’s only markings away with the old glass.

A 2.7 millimeter movement, wound by hand

Through the caseback sits the La Joux-Perret for MING Calibre 7380.M1, a manual wind movement just 2.7 millimeters thick, running at 3 hertz with 21 jewels and about 90 hours of reserve on a full wind.

Skeletonized bridges wear a matte anthracite coat over a matte black mainplate, hand finished anglage edges the bridge work, and the MING spoke pattern marks the ratchet and barrel wheels in the open view. The calibre is a custom execution for MING, substantially reworked from its base, with the spoke pattern on the ratchet and barrel wheels giving the caseback a signature that repeats across the brand’s watches.

Hours and minutes are the whole display. No date, no seconds hand and no lume is the tradeoff here, since the Halo gives up everyday tool watch utility to keep the dial clean, the case thin and the design focused on material and finish.

On the wrist the 8 millimeter case slides under a shirt cuff cleanly, and the 43 millimeter span keeps the watch centered on smaller wrists, where a wider dress case often overhangs the edge. The edition runs to 150 pieces at CHF 10,900 before taxes through MING and its retailer network, delivery runs six to ten weeks from order on the brand page, and each watch carries a two year warranty against defects.

Buy it if you want a dress watch whose case material does something no precious metal case does, at CHF 10,900 in a run of 150 pieces worldwide.

Skip it if you need lume or a date.

Titanium at a friendlier price, on Amazon

Amazon sells the Tissot PRX in a 38 millimeter titanium case with a blue dial and a Swiss automatic movement at $975 on the listing today, a plainer flavor of titanium at a far lower spend. Titanium keeps the weight down here too.

Tissot PRX Titanium 38 mm
Titanium case with an integrated bracelet
Blue dial in a 38 mm case
Swiss automatic movement

The PRX wears its titanium openly, in a brushed integrated bracelet shape drawn from the 1970s, while the Halo hides its titanium under rose gold warmth, lacquer and hand finishing at every edge. CHF 10,900 sits far above the PRX and far below precious metal dress watches from the big houses, and the gap is the hand finishing, the custom movement work and the crystallized case process.

Start with the PRX at $975 if titanium is the goal and the budget is real. Look at the Halo if the grain, the opaline dial and the thin hand wound movement are the reasons to spend, because those details are where the CHF 10,900 goes. Titanium is the thread.

Exit mobile version