Bang & Olufsen Beolab 8 packs 300 watts into an oak and aluminum sculpture

The oak slats hit first, curving down the front of the Beolab 8 like a tiny concert hall turned upright on a table. It looks sculptural. Bang & Olufsen built that shape around three drivers, 300 watts, and a room-mapping microphone tucked inside the cabinet.

Bang & Olufsen Beolab 8 speaker with oak lamella cover on a table stand

One speaker runs alone for music in a small room, and a matched pair turns into a stereo setup or surround channels beside a television in a larger one. Placement stays open too, since the same cabinet fits a table stand, a floor stand, a wall bracket, or a ceiling mount above the seats.

Bang & Olufsen Beolab 8
300 watts per speaker from three Class D amps
Table, floor, wall or ceiling placement options
Wi-Fi 6 and Bluetooth 5.3 on the Mozart platform

Oak slats, aluminum shell, and a glass top

Close view of the oak lamella cover meeting the aluminum shell on the Bang & Olufsen Beolab 8

Natural aluminum comes with oak slats. Black anthracite pairs with a dark oak cover option. Gold tone gets light oak. Fabric covers soften the look for a bedroom.

On top sits a glass interface that reacts to your fingertips for playback control. The cabinet weighs 4.1 kilograms without a stand or bracket attached.

A single piece of aluminum wraps the body in one curve, shaped in the brand’s Factory 5 plant in Denmark. Front covers swap between fabric and wood, so the look can change with the room. A tired cover never forces a new speaker. On a table stand the cabinet measures 18.9 centimeters wide, 29 centimeters tall, and 16.5 centimeters deep. A floor stand lifts the same cabinet to 114 centimeters, turning it into a slim column beside a sofa.

Three drivers and a sweet spot that follows your phone

Bang & Olufsen Beolab 8 speaker with oak cover beside a turntable

Inside sits a 0.6-inch tweeter, a 3-inch midrange, and a 5.25-inch woofer. Power splits 50, 50, and 200 watts. The tweeter gets 50 watts, the midrange gets 50 watts, and the woofer takes the 200-watt share, lifting total output to 300 watts in a cabinet under a foot tall.

Output peaks at 104 decibels for a pair, with bass capability rated at 90 decibels for the pair. Frequency range runs from 28 hertz up to 23,000 hertz, so bass lines land low, voices stay clear, and cymbals keep their edge up top.

Room compensation maps the space. Walls stop booming. The tuning adjusts to corners and open plans. Output settles into the room instead of bouncing off the walls.

Beam width control gives you two distinct listening shapes for different nights at home. Ultra-wideband tracking moves the narrow sweet spot with your phone, as long as the phone is an iPhone 11 or newer and the pair runs in stereo mode. The rated room range runs from 10 to 60 square meters in the spec sheet.

Stereo, surround, and the rest of the house

Bang & Olufsen Beolab 8 speakers flanking a television in a living room

With a Bang & Olufsen television or the Beosound Theatre soundbar, a pair slides into front or rear surround duty without a receiver rack. Connections stay flexible through Powerlink cables or WiSA wireless links to the screen.

Streaming runs deep here. Wi-Fi 6 and Bluetooth 5.3 handle the wireless feeds. AirPlay joins Chromecast built-in. Spotify Connect and TIDAL Connect cover daily services.

Two Ethernet sockets, one Powerlink port, and a USB-C line-in cover hardwired sources and network links. Standalone use stays simple through the Bang & Olufsen app, where presets and a custom equalizer shape the sound. One speaker starts the system, and a pair, a soundbar, and more rooms can join later on the same Mozart platform without replacing it.

Price and the call

Bang & Olufsen Beolab 8 speakers showing oak and fabric covers from the front and back

At $7,900 for a set in black anthracite with a gray melange cover and table stands, the pair costs more than a year of rent on a small studio near campus. That price buys two finished speakers, stands included in this configuration, plus the room tuning and multiroom platform built into each cabinet. A single speaker starts lower in other configurations. Floor stands, wall brackets, ceiling brackets, and oak covers each shift the final figure upward from there.

The catch is the closed system, since the speaker talks to Bang & Olufsen televisions and soundbars and skips HDMI for every other brand of screen. No HDMI input exists on the back panel or anywhere else on the cabinet.

Buy it if your living room already runs Bang & Olufsen gear and you want sculpture-level looks with real stereo muscle behind them at home. Skip it if your television comes from another brand and HDMI sits at the center of your setup, because this speaker won’t plug straight into that screen. Choose with your room.

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.